H-312 control unit
Description
The H-312 Control Unit is a simplest solution of the CENTRALTEST system which allows to monitor up to 7936 luminaries and operation by means of a touch screen.
Its main purpose is to supervise and control the efficiency of all system components.
FEATURES
- Monitoring of CT luminaries and supplied centrally HVCBS (central battery) and LVDBS (low voltage central battery) systems
- Visualisation of installations and location of appliances
- Control unit is serviced by means of a large touch screen or memory through the Internet browser
- Handling CT and CT-BUS, CT-LOOP basic communication technologies which allow to install up to 7 expanders on the route from the control unit to the luminaire
- New transmission method - new author's communication protocol based on MAC addresses allocated during manufacturing what eliminates the need for manual numbering
- New addressing method - apart from MAC address, each appliance in the network has a linear logic address (1-65535) and physical address representing the physical route from the main unit to the appliance
- Advanced communication with BMS (building management system) and SSP (fire detection system) systems
- Dynamic luminaires handling - they indicate an evacuation direction depending on the hazard location
TECHNICAL DATA
| Supply voltage | 230V AC 50/60Hz |
| Power consumption | 52 - 153 W |
| Protection class | I |
| Ingress protection | IP20 |
| Battery | VRLA 12V 2,2Ah (1h); 5Ah (2h); 7,2Ah (3h) |
| Interfaces | 1x Ethernet, 1x USB 2,0 |
| Screen | 10,1'', touch capacitive |
| Processor | Intel 2x1,46GHz |
| RAM memory | 4GB |
| Operating system | Microsoft Windows 10 |
| Output lines | 2, 4 or 6 |
| Inputs | WET type, none, 8, 16 or 24 |
| Weight | 10 - 15 kg |
MATERIAL
Housing material - steel. Housing colour - RAL9003.
APPLICATION
The most extended solution, intended for communication, supervision of correct operation and control of emergency luminaries.